Jump to content
Darkman

how do I silence the rattles on a crank?

Recommended Posts

You can use a bit of epoxy clay....get it at Wal-Mart in the auto parts section. You just mix part A with part B and it will harden to a rock in 15 minutes....sand smooth, done deal. I have done this to lures before only I drilled a hole and then poured the bb's out........not sure where the Normans store the bb's though so it might not be possible with this plug.

Jed V.

Link to comment
Share on other sites

You'll be able to see the weight cavity in a clear bait, drill a hole and put in some epoxy to fix the rattles. Remember they are also the ballast so if you glue them off center..... I tried it a couple of times but gave it up as a bad job and too much work for the benefit. If you want silent, I say use a wood crankbait.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top