Jump to content
5 replies to this topic
Posted 17 July 2007 - 10:56 AM
I bought some frisket film the other day and when i tried it out i got a few bleeds.they werent very bad just little things but they were noticable.does anyone know how to prevent this?
Posted 17 July 2007 - 12:05 PM
Shoot less paint. Not trying to be a smarta## but shoot a light coating, jet dry it with a hair dryer, then shoot some more if needed. The problem then becomes whether the adhesive frisket will pull paint off your crankbait. I tried several brands and they all did, so I now just use the frisket with the backing left on it. Side benefit, it makes it reusable.
Posted 17 July 2007 - 05:45 PM
Frisket film is a stenciling material that is thin and clear.Thanks BobP. I have one more question though.Once you have the on stencil cut how do you make the mirror image for the other side to match perfectly? I have tried to paint onto to the film with the stencil reversed but its hard to see and usually comes out larger.
Posted 17 July 2007 - 07:24 PM
fold it cut thru both then you got both right&left side cut out