bamabass Posted July 17, 2007 Report Share Posted July 17, 2007 I bought some frisket film the other day and when i tried it out i got a few bleeds.they werent very bad just little things but they were noticable.does anyone know how to prevent this? Quote Link to comment Share on other sites More sharing options...
BobP Posted July 17, 2007 Report Share Posted July 17, 2007 Shoot less paint. Not trying to be a smarta## but shoot a light coating, jet dry it with a hair dryer, then shoot some more if needed. The problem then becomes whether the adhesive frisket will pull paint off your crankbait. I tried several brands and they all did, so I now just use the frisket with the backing left on it. Side benefit, it makes it reusable. Quote Link to comment Share on other sites More sharing options...
hazmail Posted July 17, 2007 Report Share Posted July 17, 2007 Pardon my ignorance but what's "frisket film".pete Quote Link to comment Share on other sites More sharing options...
bamabass Posted July 17, 2007 Author Report Share Posted July 17, 2007 Frisket film is a stenciling material that is thin and clear.Thanks BobP. I have one more question though.Once you have the on stencil cut how do you make the mirror image for the other side to match perfectly? I have tried to paint onto to the film with the stencil reversed but its hard to see and usually comes out larger. Thanks Quote Link to comment Share on other sites More sharing options...
Swede Posted July 18, 2007 Report Share Posted July 18, 2007 fold it cut thru both then you got both right&left side cut out Quote Link to comment Share on other sites More sharing options...
bamabass Posted July 18, 2007 Author Report Share Posted July 18, 2007 Thanks sweede worked great Quote Link to comment Share on other sites More sharing options...
