Jump to content
need balsa body halfs?
5 replies to this topic
Posted 02 September 2007 - 12:41 PM
Does anyone have some balsa body half they want to sell. I am just playing around and want to save some time on making some shallow running balsa baits. I wanted to start with some balsa bodies (2 halfs) that i can make a wire thru balsa bait. Looking to make something like a D-bait but does not have to be exact.
Posted 02 September 2007 - 07:40 PM
Don't know anywhere you can buy body halves. Easy enough to buy the bodies and split them with a razor blade, though.
Posted 02 September 2007 - 07:55 PM
I suggest you have a go yourself, you could have made a couple while you were thinking about it.
Good luck with it, whatever you decide. Report back your experiences.
Posted 03 September 2007 - 07:51 AM
Posted 11 September 2007 - 06:23 PM
another easy solution is to just buy balsa half as thick as what you normally would. Cut 2 bodies out, use 2 sided tape to stick together while shaping, then take back apart for running your thru wire.