Jump to content
Guest Anonymous

Finished the Blackshore

Recommended Posts

Guest Anonymous

Thanks for askin....I use a dremel tool attached to a dremel drill press. I machined a stationary slide tray on a mill. I attached the guide to the dremel press plate and I have a small vice with very soft silicon rubber grips attached to the guide.

I use an angle guide to get the degree setting correct, set the lure in the grips, and mill it vertically and then side to side until complete. Might sound like a crazy way, but it works well.

The lip will generally fit in like a puzzle piece and with some 5 min epoxy, its set.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top