Jump to content

Patrick

TU Member
  • Posts

    149
  • Joined

  • Last visited

About Patrick

  • Birthday 10/20/1973

Patrick's Achievements

Newbie

Newbie (1/14)

1

Reputation

  1. I stopped buying Bears products sight unseen because of the "blind loyality" some folks have for him and his products It was just too hard to get an honest opinion of the stuff....Sometimes the truth hurts - But its better than sugar coating it The other mold makers "lack of a cheerleading squad" goes along way with me Their customer service and products(or lack there of), speak for themselves.(ie the two mold sources out of AZ) My 2 cents.....
  2. Basstackle injectors 1 - Like new 6 oz Twinjector with blending block - This is the 6oz injector x 2 1 - Like new 3 oz single injector + extra tip SOLD 11 - CC Craws 3.75" - Great flippin bait...I bought these on a deal from Jason a while back because they needed modification. Sprue holes have been machined out slighty larger for easier use with injectors. $275 paypal delivered
  3. Nice Mark, I have tons of those things laying around! For more of a "zoom fluke" fit I cut thin sheet metal pieces to fit my needs I like the tighter hook slot it gives sometimes
  4. What style? Big Hammers, Fish Trap, MC, Robo, Pearl, BassTrix, etc all have different sizes/weights...The less material equals more baits per gallon I used to pour 4" fish traps and got around 200 per gallon If I remember right - You will end up with some waste You can use the remelts and regrinds for backs and the clear for bellys, the salty bass don't care bout a pretty swimbait If your trying to sell them, thats a different story - The trick is having enough cavities to fill with no down time or reheating
  5. Angling Al...? Any contact info?, Not familiar with them.
  6. 10 ct lot of "Swimbait" molds to pour your own soft plastic creations - Each mold contains 2 cavities for a total of 20 cavities These molds make 5" - "Fish Trap" swimbaits. They have the FT stamped on tail section These molds are made from a aluminum based resin and will last forever unlike RTV molds Bait shown was poured from the same molds pictured Have 3 lots available - 30 molds total FREE SHIPPING in the US Thanks $99 OBO or 2 molds for $30 Del TYD http://i575.photobucket.com/albums/ss197/FatPat73/100_2540.jpg
  7. 10 ct lot of "Swimbait" molds to pour your own soft plastic creations - Each mold contains 2 cavities for a total of 20 cavities These molds make 5.5 "Fish Trap" swimbaits. They have the FT stamped on tail section These molds are made from a aluminum based resin and will last forever unlike RTV molds Bait shown was poured from the same molds pictured Have 3 lots available - 30 molds total FREE SHIPPING in the US Thanks Please ask any questions $99 OBO or two molds for $30 Del TYD [IMG]http://i575.photobucket.com/albums/ss197/FatPat73/100_2539.jpg[/IMG]
  8. I have a 6 count of 1.75" Twitchy molds available - 10 cavities ea They are old style hinged molds $300 Delivered TYD or $60 ea TYD
  9. The 3D baits? I saw them on another site(CC)....I would like to see that mold in person to see how it works
  10. Patrick

    Swim baits

    As long as they don't come part they look killer Good job on your 1st try!!!
  11. http://www.tungsten-heavy-powder.com/Tungsten_Heavy_Powder/Technon_Poly/technon_poly.html
  12. http://www.eclamshell.com/stock.asp They have BIG clamshells available - Good pricing as well P PS - Got any for sale/pics of the Trout bait? I'm in Cali and throw big baits from time to time and love throwing new stuff
  13. Hooksoulutions does spincasting as well http://hooksolutions.com/sunshop/index.php
  14. Thanks for a defective mold Paypal claim filed
×
×
  • Create New...
Top