BassAssault

Here is the image. Most have 3D eyes and some do not. When I say "New" Super Stainless it is Brown. I do not have the time to put the bends in these as we are covered up right now. I recommend a Table Top Wire Bender that you can get from Barlows.

No extra charge for the R-Bend. I don't have any that are non-painted.

These are on straight wires. I will bend if needed.

Guys/Gals, We have about 3500 pre painted spinnerbait heads that we will not be using and we would like offer these to people that build there own tackle. (not to people who resale). These are heads we had designed a few years ago and we are going to make some changes to them and re-release them on our site. We will sell them for $.50 each plus shipping. We have them in the following types: 3/8oz .030 Super Stainless Wire 4/0 Mustad Ultra Point Hook 1/2oz .030 Super Stainless Wire 5/0 Mustad Ultra Point Hook 3/8oz .035 New Super Stainless Wire 4/0 Mustad Ultra Point Hook 1/2oz .035 New Super Stainless Wire 5/0 Mustad Ultra Point Hook Available in the colors shown below: Thanks,

I have used some of these: Rubber Skirt Cone Collars Lure Parts Online and cut the none cone part off.

www.powderbuythepound.com I buy alot of my powder from them.

Have any of you guys that use an electrostic powder gun, ever shoot Pro-Tech clear w/flake? Just curious how well it worked. I just started shooting all of our colors but have not tried the flakes yet. Thanks

Do any of you guys know where I can possibly find a used vulcanizer, at a reasonable price, that will handle 12" molds? Thanks

Where are you guys buying your rubber material? I have bought some from Living Rubber. Thanks

Tommac, War Eagle Lures spinnerbaits are plated, you can get this done at Spectrum in Isle, MN. Their phone number is 320-676-3656. I have talked to them in the past, there are mins that need to be met before they will do it.

Guys, When shipping product to a dealer, do you pay the shipping or do you have a dollar amount set that the dealer must meet before you pay for the shipping? Also what do you guys think of our web site? Have you seen any problems or do you have any suggestions? Thanks

I cut a skirt collar in half and build the skirt as normal, except I put the collar where I want the skirt to stop just behind the skirt keeper on the jig. Put the skirt on as normal but stop with the collar just behind the skirt keeper. Then I wrap 24 gauge wire around the skirt twice (at the silicone sollar), slide the wire up to the back of the jig head and while holding one end I pull the wire tight, cut off the long piece of wire and twist the tag ends. Then I use hemostats to twist the wire. cut off the excess and you are done. Ashley www.bassassaultlures.com

Do any of you guys have experience tying rattles to jigs, i.e... rattles breaking off over time or other issues? I hand tie almost all of my jigs using 24 gauge wire and would like to offer my customers rattles that are tied on as well but do not want something that is not going to last. Thanks Ashley Bass Assault Lures