Jump to content

zx202guy

TU Member
  • Posts

    43
  • Joined

  • Last visited

About zx202guy

  • Birthday 01/06/1977

zx202guy's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. I did find some "flanged sleeve bearings" from McMaster carr. If those don't work, I'll go with the rivets I
  2. I know I am bumping an old thread. But, I'm in search of the nip-i-diddee type bearing/prop as well. I have PM'd "Spare Tire" but it appears he has been active for quite some time. Any help is appreciated
  3. Not sure if it makes a difference, but it is a telescoping blank
  4. Many years ago I cut the butt of a flipping stick off. It was too long, or so I felt. After that, it was too short and unbalanced. Havn't picked up the rod since. I am just getting into rod building/repair and wanted to resurrect this rod. How'd you guys add length (a few inches) to the butt? Weight is less of a concern at this point cause I can always add a balance kit. However, the length is an issue at it's very ackward trying to flip with a short handle. Thanks in advance. and pics are always nice!
  5. Thanks for the input guys. the D & M is similar but not what I am looking for. I would prefer more of an arky style head. Appreciate teh replies and pics!
  6. Had a skirted bass jig many years ago that had a limber stainless wire coming out of the head with a small willow blade attatched. I thought it was from DAve's Tournament Tackle but might be mistaken? anybody know what I am describing? essentially a flippin jig with a small blade for dirty water. I thought it was caled a flip-n-flash or somthing like that? anybody make something similar or have pics of the old one I am talking about?
  7. zx202guy

    Prop Bits

    I am looking for a few topwater propbaits similar to a Brians Bee or Nip-i-diddee? anybody making somthing similar?
  8. zx202guy

    WTB, Tail Spinners

    I am looking for sombody with the Do-it Mold (TS-4A1) to pour a few of the tail spinners. I can paint and assemble. Just looking for about a dozen or so.
  9. zx202guy

    WTB, Mustad Hooks

    WTB, Mustad 1/0 hooks, model # 3261 BLN or #3261 NP-BN
  10. zx202guy

    WTB, Mustad Hooks

    WTB, Mustad 1/0 hooks, model # 3261 BLN or #3261 NP-BN
  11. I am looking for 1/0 Mustad Aberdeen Black Nickel Hooks. Model # 3261 NP-BN or 3261 BLN. Only looking for 25 pieces or so.
  12. anyway to get a picture of teh shrink tubing installed in the tungsten weight?
  13. Looking for an insert similar to those found in tungsten weights. anybody know wher eI can find such a thing? thanks in advance.
  14. Maybe check with BAttlefield Wire out of MO. They make the the spinnerbait/buzzbait wires. No Idea if they custom jobs or not....maybe if the volume was there?
  15. I have a bunch out of paper clips. Just took the time to hand bend them and put them in the mold. The mold I put them in is a silicone mold so there is some forgivness on the size.
×
×
  • Create New...
Top