gunnie3035
-
Posts
648 -
Joined
-
Last visited
gunnie3035's Achievements
Newbie (1/14)
12
Reputation
-
You don't necessarily need to cut a slot in the bait to attach. Two hook hangers and two split rings can be used as well with lexan. It really depends on what action your looking for. Also depends on what sort of hinge and whether it is a top water on subsurface bait. From my experience it's hard to get and even finish using D2T on a hard flat surface with sharp corners. You mention pliable tail and to me this means a little flexibility in the tail. Pinned lexan tails have no flex and act like a rudder and the bait will have more of a mechanical action/sound. Using the hanger with split rings will obviously allow movement, but might give it more of a snake type action depending on the hinge set up. Shape of the tail will make a difference too. I have dipped lexan in DN and it didn't work out. From my experience oil based paints worked better for me or using a spray on auto clear over WB paint. I used a little Dremel buffer wheel before painting. Sandpaper left too many scratches for my liking.
-
UPDATED: Hooks, Molds, Practice Baits, 3D eyes, Paint, More lures
gunnie3035 posted a classified ad in For Sale
I'm doing some early spring cleaning and need to get rid of some stuff. I thought I would give some fellow tackle makers first crack before listing on eBay. Items will be shipped USPS Priority. I first had these listed as individual lots sold seperately, but I should have known better being a tackle junkie myself. The entire lot shipped in one big box $300. Please email me at rhurst@santaquin.org with any questions. You wont find these items any cheaper... First up is 3 Do-It jig mold; Arky, Sparkie, and a Football jig mold. You should be able to get the model numbers off the pictures for hook information. Second Lot is a boat load of Mustad 91768 BLN hooks in the following sizes/numbers: 3/0 42 hooks, 4/0 40 hooks, 5/0 85 hooks, 6/0 115 hooks (total 282). Third Lot is NIB Mustad Big Mouth Tube Hooks in the following sizes/numbers: 6/0 11pk or 55 hooks, 8/0 8pk or 32 hooks. Fourth Lot is 30 practice lures or at least I call them practice lures. There is a couple H2o baits, a couple Bombers, etc. You guys know what brand they are by looking at them. Some have been primed and some havent. Fifth Lot is VMC Barbarian treble hooks in the following numbers/sizes: 203 #4 and 236 #6, 439 total hooks. Sixth Lot is lure eyes; every size, color, cat eyes, etc. etc. I didnt count them, but I would guess there is over a 1000. One quart (32oz) of Createx WB paint in opaque blue. It has been unsealed, but not used. 34 more lures... -
U-Pol #1 Clear works well for heat set blades and won't mess with your WB paint. However it isn't as good as dipping in DN.
-
Run some bondo over them and sand to a smooth finish. It works fine.
-
You can coat a scratched up lip with Etex and then immediately wipe off with a clean cloth. This will fill in the scratches and not give the ugly epoxy look.
-
I did it cause I'm cheap and because I wanted to make money. The cheap part came in because I didn't want to spend anymore money losing $12 soft swimbaits. And pre-2008 all the guys who were making money were hardbait painters. A run of the mill paint job would go for $30 and a real good one on a proven bait would go upwards of $50. It was fun while it lasted. When I first started painting there were only a handful of good trigger men and only a couple of exceptional ones. TU kicked out some real good painters over the last 5-6 years. Now days your photography skills better be as good as your paint. Sort of got old paying all the profit to Paypal & eBay. Every time I turned around there was a fee for this and a fee for that. It sort of fee'd me right out of the game. If someone calls or I need a few to replenish my own stash then I paint.
-
I think what causes it is the amount of finger pressure applied by the operator. I tend to really clamp down the trigger when painting and flushing. Eventually the abuse wears the brass bushing in the stem. However this is just a theory on why I go through a brush or two per year and other can use the same one for years.
-
It is the brass plunger thingy. I have no idea what it is called, the valve stem maybe? The plunger is brass and so are the rings-bushings it slides in and out of or rather up and down. After a while they get worn and it begins to hang up and eventually won't spring back like it should. You start to get what I call hang fires where the airflow doesn't shut off and/or won't let air flow through the brush. Basically what I'm saying is the trigger doesn't compresses the valve stem because the valve stem isn't springing back into place like it should. At times it can even get stuck open (stuck in the downward position). It is a complete untit and can only be fixed by replacing the part. I've had this happen on every Iwata brush I have ever owned after a year of hard use. The part is like $55 shipped. I generally toss the brush and buy a new one. However since this is a higher end brush replacing the part is practical.
-
What Skeeter said!! I paint 6-7 patterns and I paint them well. If you don't like the price or the wait then go to somebody else. You want the Sitka Gear customer not the Walmart super saver shopper.
-
If you plan to use them as surface baits, you don't need any ballast on Slammers. The large hooks, eyes, and rings will take care of it.
-
Problems Wit Strike King 1.5 Green Shimmering Shad Color
gunnie3035 replied to vabassen02's topic in Hard Baits
Have you tried a silver pearl underneath the shimmer color? The silver will give it a slightly different look than a white pearl. -
Here is something to think about and is sort of related to the ease of spraying. When you get some serious hours on a brush the plating begins to wear off. When the plating wears off the paint will stick to the parts, ie needle and whatever the part is called the needle goes through (tunnel), not the nozzle. Anyway this happens faster with the more harsh cleaners like acetone. As the brush ages the more clogs it will have. Thinning, replacing the needle, and using retarder will help but eventually ya need to toss it and get a new gun. Now the cheaper the brush the faster this corrosion will happen. THere is a reason they are cheaper, but regardless it will happen to the best brushes after so many hours. I've owned and used Masters and they will work just don't expect to get the same performance. I will go through an Iwata per season and I only paint hard for about 3 months a year.
-
What gary said and the older the bottle is the more sludge it will grow. Cut it from time to time with 4011
-
Those are just freaking cool dude!!
