Kris

Does the Rustoleum Clear hold up as good as Devcon epoxy which I'm currently using?

What is the best way to attach a skirt to a crankbait (like in attached pic) and keep it from coming off or moving? Pictures would be appreciated.

After researching for a printer below $500 I purchased a Anycubic i3 Mega.

Any input of the minimum amount of air flow (CFM) needed to pull out overspray through filter?

Thanks ! for posting the pics. Do you think the filter placement works best when at a angle or does it matter?

I assume you use this type of fan? Do you have pic of how you secured it to your booth?

Look at Fusion 360 for software.

Looking for info and insight from those who built their own spray booth. Will be spraying acrylics only. Booth will be around 20" (L) x 18" (H) x 16" (D) and looking to use an exhaust fan to pull the air through a filter to catch the overspray. Not sure about the fan size needed. Interested to know what kind of fan you use in your booth. I seen where people have used computer fans, bathroom exhaust fans, inline duct fans, etc. I've read where the fan needs to pull at least 200 CFM.

What is the diving depth of a 2 1/2" SPRO RkCrawler MD 55 crankbait?

I like using minnow nets you find at fishing dept. in Wal-Mart, Bass Pro, Academy. I just cut the netting off the handle.

Been using Devcon 2T epoxy for years. I usually just brush on one coat.

Does anyone know where you can purchase blanks like the one in the pic attached. It has the holographic look INSIDE the body NOT on the outside.

I'm in need of the measurement of either a Cedar Run Outdoors or Dinger Baits 1.5 square bill. I 'm out of town and don't have any of my unpainted 1.5s with me. I look on supplier's sites but didn't find what I need. I need the measurement in inches from nose to tail (no lip), from top to belly. Pic shows what I need. Thanks.

I decided a few months ago I wanted to learn CAD in order to create 3D stencils for painting my baits. I choose Fusion 360 and had no prior experience with CAD before this. Fusion 360 is free and powerfully. I won't scratch the surface of what Fusion 360 can do. I watched several YouTube videos to learn the basics. I ended up watching mostly videos by Lars Christensen. He is very good at explaining how to use Fusion 360. Here is a link to one of his videos for beginners... https://www.youtube.com/results?search_query=fusion+360

Looking to make some stencils using a Silhouette Cameo 3 cutter. Wondering does anyone know where you can purchase the White 10mil polyethelene stencil material. All i can find is the clear.