thundercat

Thanks Smalljaw. That would explain why I can't find it. @$5 a jig I figured I could save a few bucks. Thanks again, David

Hello, looking for a mold for a swim jig, unable to locate this one. It is similar to closed eye boss or poison. Any ideas where I can find? Thanks, David.

Tried some new clear my brother uses in his hydro coating business on Ar's and such. It's a ceramic matte clear by cerakote, M316. It worked great over created and gave the baits an original look instead of the thicker coatings. I threw one on the floor to test it and this stuff is the real deal. Not sure what it cost but it's like water and it sprayed well, had hooks on in 20 minutes. The paint job isn't much but it's what the customer wanted in matte finish.

Foiled a few 110's today for the same pattern a smallmouth guide requested. They turned out good. These are unpainted, should have his two painted up to match the others soon.

I just foiled four baits, you can run the one inch wide verticle and match it up on the next inch, pretty simple, and once painted cannot tell. I also use stampee foil with same glue. Not sure how to add a picture to the post or I can show you the ones I just finished in holographic swirl gold and silver.

Try this link for thin foil, they have holographics as well and the correct adhesive. It is the same thing that is used in the nail salon business. http://www.dollarnailart.com/cat_pages/foils.html