Jump to content

MonteSS

TU Member
  • Posts

    1,661
  • Joined

  • Last visited

  • Days Won

    31

MonteSS last won the day on June 11 2020

MonteSS had the most liked content!

Profile Information

  • Location
    Central Virginia

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

MonteSS's Achievements

Newbie

Newbie (1/14)

378

Reputation

  1. I need the spline too. Ty
  2. What additive for sink do you use? On a thick bait like these, use very little colorant. My sticks weigh 11g. Here is no colorant.
  3. Well Jen lays down Createx transparent red and sprays wet on wet over that with Wicked Detail.
  4. I think i shot the Wicked Moss green and then Createx Pearl gold over it but don't remember.
  5. Under 12 oz goes first class mail. Over goes flat rate Priority box or evelope.
  6. My mistake that I really like but not sure how I did it. i think the Wicked detail colors may contribute to it.
  7. I prefer a lil finer. But they all WILL scratch your injector, nozzle and piston badly. https://www.ebay.com/itm/10-lbs-Glass-Bead-MIL-11-120-200-grit-Reborn-Doll-Coarse-Media-Abrasive/173988314772?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D225074%26meid%3Dbb8aa567576443aab60e7f005d3a17b0%26pid%3D100005%26rk%3D4%26rkt%3D12%26mehot%3Dpf%26sd%3D173988316804%26itm%3D173988314772%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5PairwiseWebWithDarwoV3BBEV2b%26brand%3DUnbranded&_trksid=p2047675.c100005.m1851
  8. No. Glass beads in clear plastic with white pearl powder
  9. I used LC Motor oil but a very light green pumkin works. 035 black and 015 gold flake (top pick is 015 black). Thrse are fairly transparent with glass beads and no salt.
  10. Fat guys is close but definitely not the same as yours. Ukraine one is similar but skinnier.
  11. I have used Alumalite micro balloons. Had to add a ton of them and be very carefull to not inhale them. They are white so as said you need a lot of a dark colorant. It will also make the bait very stiff so a lot of softener is needed. Baits are very weak and rip on the hook. Also dont overheat or reheat as the hheat causes the balloons to pop and not float.
  12. You dont want salt in outer shell as it wont be very clear.
  13. Drill bit for the hook eye and hacksaw blade where hook comes out the top.
×
×
  • Create New...
Top