wishn4fishn
-
Posts
232 -
Joined
-
Last visited
-
Days Won
2
Recent Profile Visitors
1,217 profile views
wishn4fishn's Achievements
Newbie (1/14)
39
Reputation
-
MF has some fluorescent glitters. Haven't used them though.
-
Thanks. I take the bar off my dual injector that connects the two injectors. Then just alternate pushing each one down till the molds full. -
I like the arky head myself and I make them on the poison swing head. The blade thumps the head good on the arky to the point it's wearing down the lead.
-
Bass tackle has a couple craws with a different body but the same claws.
-
For bass baits .015 and .040 I like .025 and use the .040 to accent.
-
I like spike it glitter. They have a .025 size that nobody else has.
-
My brush hog mold has one cavity on each side of the spru. Single cavities work good. I've done it on 4 cavity molds but ya have to use a old piece of spru to block some cavities. -
No heat. I start with a cold mold. It goes pretty easy.
-
One more thing you usually have to make the outside color quite a bit darker than normal because it's just a skin coat and the inside color will come through
-
Don't know the exact temps but I like the color I'm pouring a little thicker so it doesn't just run into the cavities. I do this with a two cavity. It has one cavity on each side of the spru.
-
You are correct Mark
-
It's a injection mold. I pour the green pumpkin into the spru hole and inject the chartreuse.
-
I have the same problems with the 1/4oz. I don't use soft lead I actually use bird shot. It's a 95% lead to 5% aninimity
-
Fshnh2 I mostly use the 1/4 oz. with a size 3 willow. I run a Do-It 3.75" essential series swimbait on it or a 3.8" keitech variation on there. I mostly fish it along weed lines and lay downs.
