Jump to content

big will's customs

TU Member
  • Posts

    50
  • Joined

  • Last visited

big will's customs's Achievements

Newbie

Newbie (1/14)

4

Reputation

  1. I know that the honey hole floaters were made by a couple companies by using honey holes custom mold he had made . Im not sure who molded Danny Joes if it was a custom mold or if he had haw river or another company make his for him. Ive looked and priced a custom mold to match. take care god bless
  2. i think mr del has one if I recall . take care and god bless
  3. just a online image. Ive been working on a new one though God Bless
  4. I use a shipping label and printer at the moment for my labels. God Bless
  5. bruce is a great guy that works at spike it aka lure works he can help you in tons of ways very helpful and smart. the bond coat works great ive used it since they started offering it . works great if you pour a lot of baits that you cant pour really hot for both colors I use it on a couple of old school molds for my pops. Take Care n God Bless.
  6. walmart bags from the craft section 100 for a buck or 100 for 2 bucks depending on sizes I use
  7. they have them custom made from what I have found . sorry no better news for you. God Bless
  8. howdy sorry to post so late been dealing with some issues lately. 4.5 mold 5x968 LC. or 4.25 mold 136 Red's Custom molds and he has a larger size also .I got my 4.25 from Red's Take care ya'll n God Bless
  9. heat the hook I use a butane torch. ever ad one break where I bet it good luck and god bless
  10. I used my drill press o open the eye up in my mold and then they worked fine. i make these with 5 different hook options now. good luck and god bless
  11. there's a molds listed on ebay at the moment the made by del
  12. apdriver is right on the money I made some of these but I used 1/8 wooden dowel rods that I cut and drilled works great. take care and god bless
  13. just dip them in your fluid bed if your powder coating them with a piece of electrical tape around the hook if you don't want the paint on it then once dipped just remove the tape and bake your jig.. will also work if you air brush them also . ....take care and god bless
×
×
  • Create New...
Top