pawsjr
-
Posts
10 -
Joined
-
Last visited
pawsjr's Achievements
Newbie (1/14)
2
Reputation
-
Turned on my lathe . A copy of one of my favorite lures that produced a lot of pike and monster bass for me. -
Air brushed with createx paint. Coated with devcon 20 ton exopy. -
body is made of a wine cork. It is air brushed and coated with exopy. -
-
-
Tail is a waddington shank with a dumb bell eye at the end of the tail for weight.The tail is made of catus chennille and the top of the tail is mottled thin skin with a root beer ultra wire ribbing. The tail and the body are hinged, so the body can stand up in a fighting stance. The body is catus chennille root beer color. The eyes are foam cylinder post in black. The antenna is 2 pieces of crazy legs with 3 or 4 pieces of crystal flash. The claws are orange rabbit zonker strips. With a small piece of closed cell foam glue on the tips (skin side) to help keep the claws in a upright position. The smaller legs is a brown hackle palmered to the rear -
Made out of moose hair,with black crystal flash and skirt rattles for added noise. This is an excellent in-line spinner for muskie. All component were purchased from your company . -
Turned on my lathe out of yellow pine.Purchased all the hardware from your company. Added a rattle inside for extra noise. The paint is pearl createx paint with two coats of epoxy.I slam the pike and muskie with this lure. -
purchased blank.Painted with air brush to match local bluegills. And covered with 2 coats of 20 ton epoxy. Tail is made from dollar store halloween wig. Hooks are purchased from your company.
