[A-Mac]

I'm currently working on building one myself. The copy carver is basically the plans to build the redneck version of the wood carver (wood-carver.com). I'm about 90% done with mine. The plans are 20$ to download. All reviews that I have seen were positive. I will say this, this machine costs more than the website says. When its all said and done, I'll be in about $300. Compare this to the wood-carver that does the same thing and your saving $2700! Nope, I didn't add an extra 0 to that on accident. I will say this. If you plan on building a copy carver make sure you have accurate power tools. A GOOD table saw is highly prefered. I didn't have access to a GOOD table saw so I did it all with a GOOD circular saw. Tools also needed include a drill gun (duh), band saw, titanium drill bit set, and the most valuable tool... a large carpenters square. Accuracy is the key to perfection. The machine is as accurate as you make it to be. Unless I don't complete this before I loose my subscription I will post a pic.