[borderbasser]

I'll give you guys a little tip for measuring out your epoxy. Get yourself some syringes. DO NOT get them from a medical supply store...the kind with the rubber plungers. Most of these are lubricated with silicone and will cause all sorts of problems. The ones you need, you can get from Flexcoat, a rodbuilding finish company. You may be able to get them directly from flexcoat, or you can order them from Mudhole.com. Anyway, drill a hole in the cap that the syringe tip (nipple) will fit into snugly. Then, the syringe itself becomes the cap because you will never have to take the cap off again. Just turn the bottle upside down and draw out what you need. Just make sure that you don't share syringes between bottles. I promise you guys, this method is the absolute fastest and best thing since sliced bread for mixing epoxy from a bottle. You will never weigh it out or pour it out in puddles again.