Ops miss type! 2 ton. Here is the instructions. Its for rod builders.
Prepare rod epoxy in 3-5 minutes at a brisk 24 RPM - with no mess or unsightly bubbles. Made of stainless steel for years of service. Combine epoxy in plastic mixing cups (not included) for fast mixing and easy cleanup. On/off switch is integrated into the 6-ft. power cord.
This new tool from Pacific Bay is designed to mix multi-part finish and epoxies with perfect no-bubble results, and is driven by it's included 24 RPM A/C-powered motor.
Key Features: - Mixes rod finish in 3 to 5 minutes - without bubbles
- Solid stainless steel "bearing mixer" insures thorough mixing of A & B resins
- Sturdy Base - Rugged construction will provide years of service
- Reliable On/Off switch is integrated into the 6' extension cord
- Includes 2 disposable mixing cups to get you started
- Works with standard 2.5oz mixing cups sold here
- 24 RPM - AC 120V 50/60 Hz 3.8W - 220V available for special orders - please make a note in the comments section of your order
The cups are 2.5 oz. and a pack of 125 can be had for $6.95. The puck can be cleaned with a paper towel and alcohol in about 10 sec. If it were to dry in there probably just hit it with a hammer. I was hoping some one would have used one to see how it worked. Like the idea of no air bubbles and you can prep. while it mixes.
