[Mountain Man 26]

This is what I did on the last one that I made. I made a twisted screw from .32 SS soft wire. The loop was formed around a 1/16 drill bit, then I twisted it out to 1.5 inches. Stay with me. I them took another length of wire and formed the eye, for a second twist screw, around the drill bit. Then slide that wire into the eye of the first twist screw that I had made. Then I carefully twisted it out to about 1.5 inches. Now you have 2 innner locked twist screws. Make another and your ready to glue between 2 sections of your swim bait. It has worked great so far. I'm sure this is about as clear as swamp water. I will try to post a pic later.