|
Re: Custom vise jaws experience?
clemmy - K.C's idea sounds good to me, as long as all your lures are pretty close to exactly the same.I have searched and searched and can't find any of your lures to eyeball. Here's a couple of more ideas (simple). If your lures have no symmetrical flats on them, right angles (aluminium angle) hold curves well, just lay the lure on it's back in the angle, and place 2 posts on the end (of Al angle), slide the lure between them and this will centre the blank.
Much more simple - If your lures have some flats on the side (tapered or parallel), just fix 2 pieces of Al angle (one end only, parallel to each other) to a board @ the width of the narrowest part, slide the lure between them (on it's back) and the "wedge effect" should hold it very tight, then you would need to pack under it (maybe silicone with a bit of Gladrap) to stop it rocking vertically.
Looks very clear in my head, but is probably very confusing for you without pictures, if you need some pics , let me know. *****pete
__________________
Down HERE, we have to think outside the box.
|
