Many of us are hobbiests with limited access (maybe not a bad thing) to special solvents and little if any knowledge about coatings chemistry. I apprecaite hearing comments from an expert. I've used acetone, virgin lacquer thinner, non-virgin LT and denatured alcohol. DA has worked best. Very thin, it makes a very good waterproofer. In the heat of summer when straight epoxy becomes unbrushable in about 5 mins, a little DA extends the work time but cures about as fast as unthinned epoxy. I haven't noticed any clouding.
What shelf at Home Depot do they store the MIBK/Tolulene?
