[robbor]

I will post some pics in a week or so. Right not I dont have a program installed to resize the pic so they will post.

My frame is 1 1/4" in thich and about 7 x 8 outside. Inside it is milled to 3 x 5 and has 8 hols drilled all the way through for studs. Each side of the mold takes a 1/2 aluminum plate which bolts on. The sprue formers are sall cones on 1/8 in rods. If you look at a jewelry mold frame they are almost the same, mine is just beefier and with studs. The thickness in 1 1/4 so i can put in a 1/4 spacer plate to compess and not hove excess sticking out the top when I add the cover plate.