[LedHed]

Keith
A couple of things;
You should be posting PP questions in wire baits – you will get more results.
Try a word search – the questions you are asking have been covered.

The drip on the end of the jig is usually from too much paint on the jig, curing temp is too high, and/or the jig could be too close to the heat source. Cure time is something you might have to dial in. Don’t use the oven you prepare your food in.

There are a bunch of techniques to get or keep the jig eyes clear. I clear the eyes before curing.

A word search will give you alot more info.