Quote:
Originally Posted by Spike-A-Pike
I take it the guides are put on, then the Threadmaster or Threadmaster Lite, followed by the Flex Coat. I think I could figure out the thread work okay, getting the finishes smooth would be the detail that might drive me nuts.
|
Yep, first the guides (after finding the spine on the rod) are taped on, then wrap the thread, then apply the flex coat. Threadmaster lite is a brand of epoxy similar to Flex Coat brand, but thinner. I just got it to try out for the first time.
There are some great tutorials on mudhole with video that you can watch... I learned a lot from these:
Rod Building 101
Good luck!
