|
Re: Too much powder
Need more info.
-How do you heat the lead heads? An oven set at 350F for 15 minutes works great. A torch does work but is too unpredictable.
-Jig heads that are too hot collect too much powder paint (PP).
-Must shake (fluff-up) PP after every couple of dips otherwise the PP is prone to caking on jig head.
-Swish jig head quickly thru PP than instantly tap off excess.
-Excess PP on jig head will sag during the curing process.
PP is great stuff and won't melt in contact of soft plastics. Hard as nails. But, as with everything in life, there is a learning curve.
|
