|
Re: question on a spinnerbait mold...
cubswillwin,
I have had up to a 5/0 in my 3/8 oz mold. As far as interchanging brands, it is a whole lot easier with spinner bait hooks. Almost any spinnerbait hook will work. The only thing you have to watch is the eye size. In smaller baits a hook with a lagre eye may show through the sides of the body or hinder the pour.
For the wire you can certianly go smaller and in many cases you can go up a few sizes without modification. If you drill out for a bigger size it woun't have to great an affect other that the smallet sizes will be loose. Nothing that a little masking tape won't fix. Good luck
TJ
__________________
TJ
Seduce Em, Then Stick Em
|
