printing on tissue paper - Page 2

jflures · #11 (**permalink**) March 12th, 2008

the urethane is used in marine applications. So the water is not really a problem. It also says that it is uv protected. I guess only time will tell

6_feet_deep · #12 (**permalink**) March 12th, 2008

Quote:

Originally Posted by mark poulson

Can you epoxy over spar urethane?

My guys tell me that you SHOULD be able to epoxy over urethane...just make sure that the urethane will adhere to the paint.

RiverMan · #13 (**permalink**) March 12th, 2008

I have photo finish lures I epoxied over with both etex and devcon from 5 years ago that look as bright as the day I completed them. In my humble opinion, ditch the tissue paper, use regular ole printing paper.

Jed V.

jflures · #14 (**permalink**) March 12th, 2008

I use the tissue paper, so I get the foil affect. the flash of the foil under the tissue is priceless. I live in trout country, and if you have ever seen a rainbow roll on a lure the flash is amazing. The foil under the tissue gives this affect, and is very realistic