Got a new Pasche Vl double action to custom paint Spinnerbait heads...Not sure which AIr tip and needle do I use ...Never used AIrbrush before..I notice the air tips have numbers on them #3 and #5 and I think a #1...also Came with three needles and they have marking on the ends....Help me out if you can
Thanks BC
The 1 set is the finest and the 5 being the larger. For finer details I recomend the 1 set. To control the width of the paint flow turn the adjusting wheel that is located just in front of the trigger so that the finger that retricts the trigger is all the way forward. With the 1 set this is the finest setting for a Paasche VL.
Perhaps use the 3 set to do alot of base coat and then switch to 1 to do detailing.
Jim and the fellas in wirebaits might be able to tell ya what paints would work best.
