This is my latest creation and idea.
It is a double decker dryer made from Tinker
Toys. I used a 3/8" oak dowel for the shaft.
On each end of the oak dowel is a ball bearing.
The upper shaft is driven by a spring v-belt
from the lower shaft. I hold my baits
with a hemostat and place them between two
clips. It has a cardboard housing and because
my shop is rather cool in the winter time, I added
a single eye hot plate ( I used to melt plastic on).
The heat allows the epoxy to flow out nicely.
Coley
__________________
\" Lure Making \"
The most fun you can have
with your clothes on!!
Or off, at my age.
Excellent Coley. I also use a heat source on my dryer for when it gets a little cold. It don't feel to bad when I get a little of the leftover heat.
Tally
Coley,
Are you stealing the Grandkids' Tinker Toys again? Or is this just a design you've been working since you were a mere tot? If that is the case I really admire your resolve. (Enter Larry the Cable Guy)
Seriously, nice job! And my own dryer owes more than a little to your Tinker Toy Design. Dean
__________________
Keep your priorities straight: Fish all you can!
End: AdBrite -->
Or is this just a design you've been working since you were a mere tot? If that is the case I really admire your resolve. (Enter Larry the Cable Guy)
