[cheesehead]

Sieb, go ahead and laminate... it will be stronger and less likely to warp on you.

[siebler_custom_baits]

ill see what i can get tommorow, maybe there are enough chumped up banjo necks left but they are only 22" and i wanna make handle 32 so might have to buy stock anyways.

[overkill]

My dad has some rough sawn Walnut that is 2 inches thich I believe. If you want I will check it out and send some to you.

[siebler_custom_baits]

Overkill that would be friggin awsome. Basically it has to be min of 2x2x~32. Give me a price and i can send money.

[siebler_custom_baits]

Well i got my gaff turned (Thank you Overkill!) and now ill wrap and such then try to get pics (broke my camera ). Overkill you sent enough of that wood that in a few weeks im gonna start a banjo outa it too so i may be contacting you to Buy some more wood from the same tree if possible (need enough to glue up a pot and have some for the head and maybe a resinator).

Thanskf or all the help yall.

[overkill]

let me know how much you need because my father has it listed in the classified section this weekend.

[siebler_custom_baits]

Shoot, i wont gt to look at actual sizes for a few weeks but i need probly a sqaur foot of 1" thick and for the pot in really not sure. The finished pot id 2 1/8" wide and 11" dia. Basically for pot the size you sent me before would probly due but it doesnt have to be nearly as thick.

So basically for the head i need like 12x12 of like 1" thick (workable material size, also if that isnt availible in the 12"x12" i can alwats do glueup on the smaller pieces.

For pot maybe a nice board like before maybe not so thick and preferably in good shap and not a lot of weathering.

Shoot me a price with shipping and all, shipping doesnt have to be fast or anything and ups is probly cheapest.

[goldenarrow]

post the picts already! I want to do the same if i can get my dad to un bury his lathe