[dragline]

I apologize for any redundancy concerning this subject. To the point - Does anybody have any info on constructing a drying rack or wheel? I have a small rotisserie motor. I am making Musky lures 5-8 inches (using screw - eyes). And how do I attach the lures to the rack/wheel? Thank you!

[striperchaser]

Just read it check here http://www.tackleunderground.com/mod...de=article&k=8

[black label plugs]

cut plywood into 12" round circles. spread apart at 12" using wood dowels. before attaching dowels put both circles mark every 3" then put screw eyes inside circles about 1/2'' down from mark on both sides. now put a spring on both sides .now put it all together and put it on the rotossie. you will have to drills holes for the to forks that attach to rotissie. i have beeen using this rack for a long time on swimmers and works great. good luck

[5Keepers]

Hello, HHEELLP....I need some info in a drying system, how to everything..I have read post after post until my eyes are burning.
I am painting with createx, using a Badger 150 airbrush. I have been able to get the colors/finish I desire. I have learned more than I can retain in the last few days.. The drying system is what I need more than anything.
Is this airbrush ok? Does anyone spray ultra-fine glitter through their brush?.. what is the best way to apply glitter?
I know.. too many questions in one post... sorry...
THANKS!
Steve

[Tony Maxwell]

Glitter : I mix it in with my clear coat "2 ton Epoxy" and brush it on.
Tony

[skeeter jones]

here is a thread with pictures
/www.tackleunderground.com/forum/showthread.php?t=8281&highlight=drying+wheelhttp://http://www.tackleunderground....t=drying+wheel