|
» October 2008 |
| S |
M |
T |
W |
T |
F |
S |
| 28 | 29 | 30 |
1
|
2
|
3
|
4
|
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
» Stats |
Members: 8,174
Threads: 13,553
Posts: 103,491
Top Poster: nova (1,753)
|
| Welcome to our newest member, jad77 |
|
 |
April 5th, 2006
|
|
|
|
Join Date: Aug 2003
Location: Missouri
Posts: 56
Gallery:
0
|
|
|
Chatterbait blades
I want to make some blades from stainless steel. I need it .010 thickness. Can anyone give me a source??
|
April 7th, 2006
|
 |
|
|
Join Date: May 2005
Location: Ore Here
Posts: 148
Gallery:
0
|
|
http://www.mcmaster.com/ just type in what you are searching for they have it all good luck
|
January 1st, 2007
|
 |
|
|
Join Date: Jun 2005
Location: NW Ohio
Posts: 41
Gallery:
0
|
|
|
Re: Chatterbait blades
Check your local machine shop or metal fab shop. They sometimes will sell you scraps for cheap.
|
January 2nd, 2007
|
 |
TU Club Member
|
|
Join Date: Mar 2005
Location: Libertyville, IL
Posts: 671
Gallery:
0
|
|
|
Re: Chatterbait blades
I have some, if you can't find it, but it will probably be cheaper to buy it locally....
|
January 16th, 2007
|
 |
|
|
Join Date: Jan 2007
Location: Northeast Texas
Posts: 187
Gallery:
0
|
|
|
Re: Chatterbait blades
I went to a local air conditioning/sheet metal shop and they gave me enough scraps of 22ga stainless to make about 100 blades. Since then blades have become available from Netcraft and Barlows and at 19.95 a hundred not worth my time to make them....they are a little thicker than the original Chatterbait blade but they work fine for me...they also have the pre-cut prism tape for the blades.
|
February 12th, 2007
|
|
|
|
Join Date: Dec 2006
Location: Philly
Posts: 28
Gallery:
0
|
|
|
Re: Chatterbait blades
I will send you some of mine to try for free. All I need is a name and address. Not sure if you cutting a unique design or going for the same look as the original but mine may save you the hassle of cutting them yourself.
|
February 17th, 2007
|
 |
|
|
Join Date: Jan 2006
Location: Mass
Posts: 245
|
|
|
Re: Chatterbait blades
|
June 16th, 2007
|
 |
|
|
Join Date: Mar 2007
Location: Iowa
Posts: 20
Gallery:
0
|
|
|
Re: Chatterbait blades
Does anybody know where I can buy these in bulk that are not hexagonal shaped?
|
June 17th, 2007
|
|
TU Club Member
|
|
Join Date: Mar 2005
Location: Libertyville, IL
Posts: 671
Gallery:
0
|
|
|
Re: Chatterbait blades
GotstaFish Tackle,
If you have an idea of what you want, or you want me to design it, PM me. I can make anything you want, with any kind of profile. Ted.
|
June 24th, 2007
|
 |
TU Club Member
|
|
Join Date: Feb 2006
Location: Jamestown, IN
Posts: 104
|
|
|
Re: Chatterbait blades
I have six punch presses. If you want several 1000 made pm me. I would need diminsions, thickness and material type.
Thanks, MAV
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
All times are GMT -4. The time now is 08:39 PM.
|
