[Vignot']

Hello everybody,

I wonder what method you use to place the guides on a blank.
After some Googling, I've found the "tip pulling method" and a "static deflection method" that I don't really understand :
http://www.anglersworkshop.com/aw/ar...acing.doc.html

My english is not good enough and I'm lost at the #13 step.

Is there any other method to get a proper stress distribution ?
I'm talking about conventional bass rods.

Thanks,
Vignot'

[HookUp]

If you're talking conventional 'spinning' bass rods, this is the best article I've read:

http://www.rodbuilding.org/library/newguide.html

[Vignot']

Thanks for the link, I missed this one.