Jump to content

Nathan

Site Moderator
 View Profile  See their activity

  • Posts

    2,188

  • Joined

  • Last visited

  • Days Won

    38

 Content Type 

Everything posted by Nathan

  1. Nathan
    Interesting concept but photos like this belong in the proper photo gallery..Nathan
  2. Nathan
    He’ll have a blast…Take some advice from one grandpa to another..Buy a dozen night crawlers..built in fun for a kids in a container..That’s what I do with my grandsons..works every time!!..Nathan
  3. Nathan
    Mark, I had to re-read your post about your grandson..At first I thought you gave the hooks to him as bath toys..Not the lures…Getting older really stinks…lol..Nathan
  4. Nathan
    Mark is right on the money…But the best tidbit of advice he gave you was in the last line…”only change one thing at a time “..Nathan
  5. Nathan
    Vanbass, just saw this…Pledge can work great as a protection coat for your paint if your chosen top coat doesn’t want to play nice..just dip..let dry and then top coat…As for the old and new formulas on the Pledge..It’s probably been 8-10 years since it changed…I believe if you google you’ll find more information on it..Nathan
  6. Nathan
    Fish Pirate, thanks for the reply..I assume your using the brush on formula instead of the spray on?..Nathan
  7. Nathan
    I should have seen that one coming BobP…It appears no one is familiar with it ( or is not saying anything lol)..I’ll do a little research and see what I can find out and report back..Nathan
  8. Nathan
    A UV cure product similar to lacquer..Nathan
  9. Nathan
    Your spinner will catch fish..just need to get a few under your belt and you’ll see a improvement. With that said..photos like these need to be put in the proper photo gallery..Nathan
  10. Nathan
    Quick tip..if you want to try different sizes or styles of bills in your bait..you can use elmers rubber cement...It is plenty strong to hold for testing..Then when you decide on the Bill the rubber cement peals off clean then us Devcon 2ton or similar to permanently install them..Nathan
  11. Nathan
    This is a great Idea!!..Nathan
  12. Nathan
    If you go to YouTube and search “Redg8r” He started this site and was working on a lure copier years ago.The video maybe of some help..Nate
  13. Nathan
    Great pictures but they belong in the gallery..Nathan
  14. Nathan
    Hey guys, you can glue your diving bills in the matter of seconds using UV GLUE.It is even easier and faster if you have a hand torch to set the glue with. The UV rays pass right through the lexan like a window and set it..I doubt this will work on computer board lips..Nathan
  15. Nathan
    051 would be a good diameter..you could go up to 062 but that would be a bear to bend...Nate
  16. Nathan
    Instead of buck tail..that might be craft fur..Nathan
  17. Nathan

    I'm an idiot

    Nathan replied to exx1976's topic in Hard Baits

    There is one thing you should take away from this is they weren’t failures. You learned a lot from these baits that didn’t perform to your expectations.I ‘ve said it a million times.You learn more from your so called failures than you do your wins!!..Nathan
  18. Nathan
    Not bad at all..They will catch fish..In the future photos like these belong in the gallery..Nathan
  19. Nathan
    The first two things I would buy..even before a airbrush is a Bandsaw and a table top sander...you can build just about any lure with those two tools..Nathan
  20. Nathan
    Wondering when that would start!!..Nathan
  21. Nathan
    Poly acrylic is a good carrier for glitter.It is water based and can be thinned.If you use fine enough glitter you can spray it on or use a brush if you want more control over where it goes..Nathan
  22. Nathan
    Hillbilly, if you just search the term “jitterbug” with our search feature you’ll find a lot of information gathered through the years.I do remember someone saying the angle of the bill should be around 30 degrees ..Nathan
  23. Nathan
    We love seeing your work..but these pictures belong in the photo section of our site..Nathan
  24. Nathan
    Just make sure your threads on the jar and lid are clean from any drips..I add a shot of Bloxygen just to be safe..have kept it in Mason jars for over 18 months and still going..Nate
  25. Nathan

    epoxy mixing cup

    Nathan replied to Jonah's topic in Hard Baits

    The Loon one was the one Ihad posted a while back..Nathan
×
×
  • Create New...
Top