Pop

Thanks, I will take a look at them. Pop

Story of my life, but better late than never. I believe the previous owner of Lure craft who sold all hand poured molds knew how to do the pre-rigged worms. He sold specially made molds to accommodate the worms with clips or o rings to hold the internal line. Maybe he passed on the information to the current owner. Good Luck, Pop

Thanks for all replies. I will continue to try and purchase a new Bass Tackle twin injector and blending block. As a side, I live in Pocono Lake Pennsylvania and have quite a few boxes of popcorn salt. If you are in the area I will GIVE some boxes to anyone that uses salt in their baits. Best fishing. Pop

Just starting with injection molds. Most companies are out of stock for the injectors. I'm looking for a 6oz injector and would appreciate recommendations. Should mention I would prefer a locking injector. All help is appreciated. Do-It Molds has their injector available but they are not locking. Are they good injectors? Thanks again. Pop

There must be a mold somewhere as confidence baits sells a 2 inch tube bait. I am looking into dipping instead of a mold and have seen some clever ways of cutting the tails. Pop

Molds are still available. Thanks

Members 4 posts 0 warning points Posted Today, 09:32 PM Ok, tore one apart today and still not sure of all material, but; here is my opinion and the opinion of the gentleman at the fly shop. The hook is a nymph size 8, 3XL The tail is Maribou and Mallard, Rib-micro green flashabou, Body-LarvaLace, Under Wing and Over Wing of mallard, Collar is Micro Flashabou and ofcourse a black bead head. White thread is used for tying. The under wing and over wing are from the same feather. The maribou seems to be tied in almost to the bead head. This gives the fly some bulk. I think this streamer will do a good job. Thanks for everyone's help. Feed back is appreciated.

That is the one.

Saw a fly today that is sold by Crazy Legz, it is call the "Iron Mike". The clerk in the fly shop and myself could not figure how it was tied. Does anyone know how to ty this fly? Looks like a great fly for either trout or crappie. Thanks, Pop

Can anyone recommend a Wine color powder paint? Thanks, Pop

Makes sense if I don't do too many, to file off the eyes. I'll wait and see how many I get into and if I start doing any quantity, I'll fill in the eyes. Pop

I want to pour some of these jigs but don't want the eyes that are in the mold. I can only think of 2 ways to eliminate them. One would be to fill in the small holes in the mold that make the eyes but can't decide the best material, or to file off the eyes after they are poured. For those who pour these jigs, and eliminate the eyes, what do you do to accomplish this. Thanks for your help. Pop

Hope I am not breaking any site rules. I am not into spinnerbaits but have a number of poured spinnerbaits (I'd need to check quanity and size) that have been laying around. Also I have Mustad 32786BLN size 3/0, Eagle Claw L255M size 2/0, and 3/0 all in boxes of 1,000. Probably some of the hooks have been removed but does not appear to be many removed. I'd like to get rid of all. Pop

Does anyone use popcorn salt? Pop

Thanks, appreciate the feed back. Pop

Thanks Mark. I've noticed that the weighted hooks I have purchased are all flat eye hooks, that is why I asked the question. Is there a reason why flat eye hooks for weighted hooks might be better? I have also noted that the weight is further forward at the bend towards the eye, whereas the Do-It mold has the weight further to the rear bend. Pop

Is there a way to modify the Do-It mold for a flat eye jig hook? Pop

Does anyone make a weighted hook mold other than Do-It? Any help is appreciated. Thanks, Pop

Not a receipt but a receipe Pop

Anyone have a receipt for Apple Plum. Would really appreciate. Thanx, Pop

Billing seems to be a big problem with them. I returned a wrong item and they mailed me the replacement. Problem was they charged my credit card again. (I didn't give them permission to keep my credit card information), but; maybe they got it off my original order, don't know how all that works. When I brought it to their attention they said they would check it out. Did not hear back from them so I called again. They asked me to send them the receipts, which I faxed them copies. Again they said they would check a get back to me. Have you heard from them, me neither. I am not going to get overly excited about it, just don't buy from them anymore. Pop

According to TJ's Tackle, you need very little air pressure to spray powder paint. No compressor is necessary. He said they are having good success with the air pump used with with the Fluid Beds. Because of the low air pressure no moisture trap is needed. Pop

I did some searching for the "Porous Polyethylene Sheet" and found that Amazon sells this in various sizes and thicknesses. Hope someone with more knowledge than I have has a suggestion which thickness to purchase if this is the right material. Pop