Jump to content

Munkin

TU Member
  • Posts

    690
  • Joined

  • Last visited

  • Days Won

    15

Everything posted by Munkin

  1. The 32724 5/0 does not fit but the mold could easily be modified to work. The VMC 30 degee 1/0 does fit in the 1/8ozand bigger cavities though if you are looking for another hook. Allen
  2. I have that mold and some 5/0 32724's so I can check. Allen
  3. Wish I would have seen this earlier as I just ordered $200 worth of stuff. Allen
  4. Anyone know where I can get the little wires that Phenix and Picasso use to connect the blades to their chatterbaits? I checked with Mark at Mustang wire and he doesn't have them. Allen
  5. There isn't much difference between the two and 97% of people cannot tell them apart. If you just want a few to try I can send you some? I have at least 900 of them right now. Allen
  6. Not sure then but I did get some from one of those places? I by mine from Shorty's by the thousands now. Allen
  7. Here is a comparison on the two hooks I use the most. Top hook is the EC in 5/0, bottom is the Gamakatsu 345 in 4/0. Gamakatsu has a wider gap and is thicker while the EC is longer. Allen
  8. I think I still have some that I bought long ago from someone on here. Let me see if I can find them tomorrow. Allen
  9. L2724 is the model number, you can also bend hooks to 30 degrees. Allen
  10. The Mustad you mentioned is the light wire one you are looking for. I would suggest you try the Eagle Claw one as well. The Gamakatsu he uses is a custom hook and the only way you can get them is buy 50k of them. Allen
  11. If the points are dull and the eye is crooked than they are real Mustads. Allen
  12. Is this a jig you have or just a pic you found? Someone could make a spincast mold. Allen
  13. What do you thin it with? Just ordered some KBS to try. Allen
  14. I would say good luck communicating with them. Sent them 5 emails and only received one reply so far. I ask about having some Hole-In-One skirts made in non stock colors and just received a link to their web page. Allen
  15. That is very easy to do just make sure to buy the longer wire keepers. Allen
  16. Oomoo mold max 60 which can be bought a lot of places even Amazon. Allen
  17. I was thinking that was who you were talking about. Allen
  18. I have had problems like the bottom one when I mixed together 2 different powder paints. Do you use a lot of talc in the spincast mold? That gave me some painting problems before. Allen
  19. What does everyone recommend for chrome and gold powder paint? I want to give it a try and am looking to see what everyone likes. Allen
  20. This is the guy you want to talk to about modifying Do-It molds. I doubt he owns one that isn't modified in some way. Allen
×
×
  • Create New...
Top