-
Posts
708 -
Joined
-
Last visited
-
Days Won
18
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Posts posted by Munkin
-
-
On 7/30/2020 at 8:03 PM, CNC Molds N Stuff said:
Somedays I very much understand why Shawn Collins quit responding to a lot of people's emails.
GAHHHH!
I understand the tire kickers and the guys that think a custom CNC mold should be the same price as a Do-it one. What gets me is I have bought 9 molds from him and cannot get a reply about buying some more of his base pins.
Allen
- 1
-
I saw some in the Shorty's catalog they just sent me.
Allen
-
You going catfishing?
Allen
-
Let me know if you figure it out? I tried several different ways and most are failures.
Allen
-
-
Anyone know of any wire manufacturers besides Mustang?
Allen
-
11 hours ago, jigswimmer said:
Thanks for checking. What is the reason for not fitting? Is the 5/0 hook wire too big in diameter? Some other reason? I was curious about the fit of the 4/0 because it is the same diameter as the 1/0 Mustad 91768, which fits my mold.
Is the hook in the picture the VMC? It appears to be similar to the 1/0 Mustad 91768 that I showed in my picture.
Eye is just a little too big to fit the mold with the the 5/0. You could easily modify it though if you want to use that hook.
Yes that is a VMC hook (have to find the pack to see what model number) which I like better than the Mustad 91768. The VMC runs larger in these hooks as a size 1/0 is the same size or slightly bigger than the Mustad 2/0. Another thing is the gap is not as wide but these work really well for weighted swimbait hooks.
Allen
-
-
4 hours ago, jigswimmer said:
I bet you’re right. My 91768 hooks work well and they are 30 degree. The 32724s are similar in diameter. I’ll buy a few and try it out. Thanks for checking. I appreciate it!
I have that mold and some 5/0 32724's so I can check.
Allen
- 1
-
On 1/4/2021 at 8:19 AM, smalljaw said:
SDG 10
Wish I would have seen this earlier as I just ordered $200 worth of stuff.
Allen
-
Anyone know where I can get the little wires that Phenix and Picasso use to connect the blades to their chatterbaits? I checked with Mark at Mustang wire and he doesn't have them.
Allen
-
6 hours ago, jigswimmer said:
Gotcha. Thanks. I certainly don't need 1000+. I might just give that light wire Mustad 32724 a try.
There isn't much difference between the two and 97% of people cannot tell them apart. If you just want a few to try I can send you some? I have at least 900 of them right now.
Allen
- 1
-
5 minutes ago, jigswimmer said:
Thanks Allen. I can't seem to find a source for the EC hook. Barlows doesn't have it, nor does LPO. Any suggestions for another source?
Not sure then but I did get some from one of those places? I by mine from Shorty's by the thousands now.
Allen
-
-
I think I still have some that I bought long ago from someone on here. Let me see if I can find them tomorrow.
Allen
-
11 minutes ago, jigswimmer said:
Thanks Allen! Do you know what the hook number is for the EC hook, off hand? No big deal if you don’t. I can find it. I thought I read somewhere that the Gama hook would have to be purchased in huge lots. I’m just looking for myself, not production scale.
L2724 is the model number, you can also bend hooks to 30 degrees.
Allen
- 1
-
The Mustad you mentioned is the light wire one you are looking for. I would suggest you try the Eagle Claw one as well. The Gamakatsu he uses is a custom hook and the only way you can get them is buy 50k of them.
Allen
-
On 12/5/2020 at 9:47 AM, Les Young said:
I know the fellow i buy all of my jigs from said mustad has a generic chinese hook, but he decided against using them when his supplier tried to get him to try them because of being cheaper. The hooks he uses don't rust & he had samples sent to him & he said the generic mustad would pretty quick.
If the points are dull and the eye is crooked than they are real Mustads.
Allen
-
Is this a jig you have or just a pic you found? Someone could make a spincast mold.
Allen
-
On 11/23/2020 at 10:36 AM, ravenlures said:
I thin out my KBS 20%
What do you thin it with? Just ordered some KBS to try.
Allen
-
I would say good luck communicating with them. Sent them 5 emails and only received one reply so far. I ask about having some Hole-In-One skirts made in non stock colors and just received a link to their web page.
Allen
-
1 hour ago, jigswimmer said:
Did you modify the mold for a wire keeper?
That is very easy to do just make sure to buy the longer wire keepers.
Allen
-
Oomoo mold max 60 which can be bought a lot of places even Amazon.
Allen
- 1
-
I was thinking that was who you were talking about.
Allen
- 1
Spinnerbait spacer beads
in Wire Baits
Posted
This is how I do it as well with hollow beads and leader sleeves. I will not use a plastic bead for metal to rotate on as it just is a bad idea.
Allen