Jump to content

Predator Bass Baits

TU Sponsor
  • Posts

    687
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Predator Bass Baits

  1. Rayburnguy, Do you use bloxygen on the top hole after every time you use ? seeing when opening both ends it would draw air in.
  2. Has anyone tried this. I had a guy call me today and he said he uses it and coats about 700 lures a day with it. http://www.creativewholesale.com/ProductDetail/tabid/174/ProductID/15/Default.aspx?SortField=free3+desc%2Cproductname
  3. Thanks, I have them now, it is hard to capture the colors on them with a picture.
  4. Hey Guy's Just wanted to give a heads up, I hope to have the rattling wiggle warts with transparent holo paper ( prism type ) and holographic in stock Monday 12/29/14 I am also coming out with a one knocker type that will slow rise, it will have one tungsten ball as the Knocker, it is believed that it changes the action because of the tungsten moving from side to side, it will still have a lead rattle ball also, I hope to have them some time toward the middle or end of Jan. I also had a new mold built for the 2.5 square bill using a LC RC 2.5 that are now in stock. the old 2.5 lure the mold took a dump.
  5. My 2 biggest fish today came off a craw pattern.
  6. Thanks Mark. Also to those that offered If I am in need of some flat warts I will let you know.
  7. OK, I purchased a craw color one off ebay, I will put it to use and see how it works.
  8. I tested one that I weighted internally and the suspending model I will have in a couple months or less will be right around needing or not needing the Dot, depends on hook weight and clear coat weight. Yes the suspending models had the 3rd lead ball.
  9. Mark, I would like to get the deeper diver flat warts but I do not know if there is enough buyers to make it worth the mold cost. I am working on a suspending model right now. To get the extra weight needed and seeing the lure does not have many places to add weight the only thing I see I can do is put 2pcs of 5mm tungsten ball in the front chamber , this will add 2grams to the lure, but the only rattle it will have is the one loose rattle ball but that might be a good thing as well the 2pcs of tungsten will slightly rattle.
  10. Blackjack, are you willing to sell me 1-2 of them ?
  11. Thanks, I never seen one or heard about it before but someone told me there was a deeper diver version of the wiggle wart that dives to 13' and he called it a WD wiggle Wart, does anyone know of this model and were I can get a couple so I can get them built ?
  12. Someone offers the little john already don't they ? I am working on getting a wart suspending model but it is going to take a tungsten weight to get it heavier. If anyone has a couple of the DW warts they can part with I would love to get that mold made.
  13. Thanks Guys.. I should have more tomorrow if anyone is waiting for the rattling version.
  14. Is this what your after ? I need to work on my pattern and eyes, I slapped this together trying to figure something out, I have not painted in 2 years This is wicked red oxide with no base under it.
  15. Thanks Guy's For once I may have pleased some of you,
  16. Thanks Tim, I am glad to hear this. I probably will run out of stock before the next batch comes in, I had 1200pcs to start and I only have 400 left. I hope to have more by end of next week.
  17. Thanks for the review I hope all feel they are good but I know I can not please everyone. The smaller ( rear ) chamber I had the same size ball as the front one used in this chamber and it more then likely will not rattle which can be good or bad, It will not rattle as loud and that is what I was trying to accomplish. They say the old ones the rattles stick so I was hoping to keep the sound down on them. The original warts were made with a different plastic so the sound will be a tad different. The silent versions you can not glue the front ball in the center so they are glued off center and that will not effect the lures swimming action. The line across the bill is between the nose of the lure and the line tie, this line I was told had to be there because they could not get the lure body out of the injection mold because of the curved bill, I myself thought it made no sense but was told not engineer could do it without it. These lures are a couple grams lighter then the originals , the plastic that the originals used is a heavier plastic and I do not know were to get this heavy cheap plastic. The plastic I used is ABS. I have not sold any of these on ebay so those were not from me.
  18. I am surprised no one has received any yet, I have shipped out a bunch of them. I am sure in a few days guys will be posting.
  19. Thanks, I hope everyone likes them.
  20. I tested the lure in my neighbors pond, it is windy and dark water so I could not see it swim deep but the thing feels good , I tested a original as well and I could not tell you which lure was which if I would not have known, they had the same rod tip vibration. Now hopefully it catches fish.....
  21. My engineer tested them but I have not yet, I have some drying right now I will be testing tomorrow.
×
×
  • Create New...
Top