Snook

Here's a few more.

Hello Everyone, Thank you Jerry for TU. I just wanted to take a moment to say thanks to everyone here who has helped me thus far. I could not have done it without you guys. Thank you for the time and patience that newbie redundancy entails. And thank you all those who help maintain TU which allows this to continue. I was able to grab a few moments to play with the new Xmas gift (digital camera) and finally snap a few pics to show what you all have enabled me to accomplish. I do not have the time to carve my own at this point, the day will come soon after I graduate. Until then I am satisfied with rebuilding beaters collected on dives. Any criticism, good or bad is much appreciated. I tried to re-size pics not to be too much. Hope it works. James

Jason, Sorry to hear you are having topcoat issues, lord knows we all have had them. I have to agree with Scoop on everything he has posted. I have learned some incredible things from this site which has allowed me to produce some wonderful baits that friends are all clamoring for. My two cents (probably worth less), I use the wax coated paper plates to mix my Devcon 30 min. I use a straighten paperclip. Depending on the size of the bait, I hardly mix more than an amount the size of a quarter after squeezed on to the plate. I am covering bombers, windcheaters, yo-zuri

Hello Everyone, I recently inherited a Mitchell 302 Salt water reel. It of course has sentimental value and I was looking to restore it and put on my shelf with some other vintage tackle I have amassed over the years. The reel itself has cleaned up very nicely, however the spool

Touch? Craw Peta persons don?t fish anyway. I would love to take them with us on a tuna trip to the far side of the Gulf stream. They wouldn?t be happy. Is Alumilite RC-3 hard enough to just screw hardware into, or are you epoxying? That is the same material from the slip mold tutorial? It will be a huge hit for you as I said. Congrats, James

CRAW!!! That craw is amazing! ( I won't tell anybody, but it looks like you used a real craw ) I?ll take three to start, how about sharing how it works, I didn?t see any lip, does it just bounce along the bottom, suspend, float, what? I would say by the bass attached to it that it works great. Gotta love that craw by Craw. James

Hey T-Bone, I don?t know about glow paint, however you could try and search both the hard bait and wire bait forums. I know that the great Art Brush had started a tutorial using powder some time back. It looked really nice. I wished he would someday finish it. Lapala was working with them to as I remember; I believe he was looking for some questions to be answered as well. You could try and ask them? Here is the thread I mentioned that Art Brush was showing the making of a tutorial. http://www.tackleunderground.com/forum/showthread.php?t=3291&highlight=Glow+Paint Hope it helps some, James

That's just Awesome... James

Hello Mullet, I am here on the east side of you, the Indian, Banana River, and Mosquito Lagoon. I do not know exactly the legality of it, but do know of guys selling buck tails in the 1/2 to 2 ounce sizes (mainly the red flairs for snook, and the heavier stuff for off shore) in the local bait shops over here? I know many are using the hot lips mold from do-it. I know of a couple of guys who are using what were originally do-it molds modified/customized to their liking? I hope this helps, If you figure out how to master the Devcon in this Florida weather, please share. Right now I am chalking the epoxy up to rookie mistakes. Be careful, I have read and learned much in very a very little time here at TU, I have to say it is very addicting. James

I am with Clemmy on this one. I would love to learn how to modify or altar some baits for the better. I understand that some would prefer not to share, but to all those willing, I would be happy to learn. Thanks in advance, James

Wow, I was sweating it there for a minute. Very glad to see you back up and running. I felt as if I had just found the greatest site only to have it disappear before I could finish my first bait. I was like CrawChuck and was going through withdraws. I also like the looks of the revamped TU. Can't wait to see when it's 100%. Thanks again, James

Thanks Everyone, Your help was greatly appreciated. I found that the cheap plastic fast blast bottles I am using aren?t worth a darn and are causing my problems. The siphon tube in the bottle is splitting around the neck allowing the airbrush to suck air and pulse. When the siphon tube is fitted tight, the gun works perfect. I am just going to have to get some decent bottles and caps. Finally got to lay down some pearl white over my base coat on a couple of baits today, and actually have them turn out as I wanted. Still trying to decide on my color for the backs. Can?t wait for this weekend, very excited to see what?s to come with my new hobby. Thanks again, James

I just new Cheesehead was correct and the compressor was running causing the pulsing. It just sounded right to me. Mixed some paint, loaded up the Airbrush this morning and practiced a little, worked great, paint ran low, switched colors, and BAM!!! Started pulsing? Took the Brush apart cleaned it, ran water, then thinner, and then more water through it, still pulsing, sometimes it even would stop spraying media (paint, water, thinner, windex, etc.) all together. I always had air pressure, and I paid close attention to make sure the air ran through the gun steady and consistent. This is my theory, I am looking for some feedback please. I sat down and played with the airbrush for an hour or so and I think I stumbled across the problem. As I stated, I have the dual action Crescendo 175 airbrush, the paint connects to the bottom side of the airbrush and is siphoned up and through the plastic paint bottle container. This bottle assembly is completely plastic and I am guessing about 4oz in size (approx 4? tall). I noticed that on this bottle assembly that the cap fits nice and snug into the airbrush no problems, however, after removing the plastic straw from the underside of the cap which the paint travels through, the straw no longer fit snug, and would work loose requiring to be reattached. I turned the straw over and shoved the opposite end onto the cap and proceeded to shoot water. It appeared to remedy the pulsing for the moment, but I had no time to continue to tinker with it, I had to get ready for work. I wondering if any of you professionals, experts, :-D feel this could be the root of my problems? Has anyone ever heard of this happening before? I am planning a trip to the local hobby shop to see if I can get a better built set of bottles (smaller too). I looked on line and saw plastic, metal, and glass bottles available. Any recommendations as too what I should look for and get? Hope this is the monster causing my problems. Any thoughts or comments that may help would be greatly appreciated. Thanks to everyone for being patient and putting up with my learning curve. Extra thanks to those who replied already. Tight lines everyone, Thanks, James

Hey Jerk, I will keep an eye out for your crank bait while at the marsh. Depending on how long it has been since you lost it, I might practice my paint skills on it before sending back to you. When you get it, try not to laugh too hard! Something that ugly has to catch fish! :-D I haven?t personally been to the Farm in months, planning on a trip to the Gulf Stream next week with some friends from work. The bite was on this past weekend according to the word on the street. Weather hasn?t been that great offshore lately; winds are dying down so I?m itching to go. When I do get out to some fresh water I will be sure to keep an eye out for your plug and give you a report. Thanks, James

Cheesehead, Thanks so much, I feel like such an idiot. In my frustration I was running the airbrush constantly trying to adjust everything to stop the pulse. In retrospect, I bet you are a hundred percent right, the compressor is running thus causing my pulse. With the tank full, I should watch to see if the brush will still pulse. I am betting it wont. But I can?t try until tomorrow, I work second shift at the hospital. I am sure the needle is not bent, and I able to properly dial in any pressure to 125psi through the regulator so I would think the regulator is okay. I however, do not have an inline pneumatic filtration system for water or oil which can build inside the tank. I after most every use open the drain plug and just empty the tank. I just started using the compressor for the airbrush; it has only been attached the two times. I got this compressor new at Christmas in 05 and have only used for a couple of odd jobs around the house. Would you recommend a filtration system for the little hobbyist at home doing a few plugs here and there? If so, who would you recommend? Can I get away with using a compressor like the craftsman? It was my understanding the airbrush compressors were only different in that they were more portable and quieter when running. Am I mistaken? Freak?n Estrogen, causing world problems. Bottom line is I should probably spend less time talking to attractive women, and more time reading how to use your airbrush! Freak?n Estrogen strikes again! :grin: Thanks, James