fish devil

I found a free tackle making site that I have been lurking.

goodbye tackle underground, I am not paying for this website. I would like to thank the members that helped me out.

I'm happy it worked out well for you, I sell lots of that stuff. Unfortunately I had a major seizure and just got out of the hospital so I haven't been able to look at your site. Just pay it forward to someone else that is in need.

Its in the mail. On screen like that you can't rub to hard. Rub lightly for a longer time. I think I had the same model on the bow of my boat and replaced it last year. Now if I can only remember where I put it.

the stuff I am giving him to try out is what I used to use on my hockey Itech face mask.

micro fiber cloth and if it doesn't come of with the cloth dry just a dap of water on the cloth. You can get them for cheap at wally world. $4.99 for 8 for the cheap ones or you can buy a better one that lasts longer. Edit: Just notices you said oxidation. I sell this product called MAAS polish and if it doesn't work nothing will. PM me your mailing address and I will send you some to use. I'll also send a microfiber cloth. Please send the unused portion of the polish back to me and keep the micro fiber cloth. (I'm letting you barrow my tube of polish) MAAS Inc. Are you sure its on the outside and not inside?

Tackleunderground - Search Forums You will have a lot of answers using the search feature with that question. . I soak my baits over night in wood sealer, but I am no pro at this.

I use a 150 psi commercial 6 gal nail gun compressor. I put a moisture trap with a regulator on it. The moisture trap will catch any water that is in the air supply to the air gun and on older tanks it will catch and small rust partials.

where in NJ do you live that you need to mail order a TM?

I used to build fishing nets (steam bend) and I tested gorilla and titebond III. They both held but if you left the net done with gorilla glue in the direct sun the glue would soften enough that I can slide the wood a hair. (Going back 4 years) Titebond III did not have the same effects.

to enhance the glow put a bright white base down first then apply the glow.

ditto. I have pics of mine in my gallery.

I use a pitcher of water and put it inside a cooking pot. Make sure the pitcher is full to the top. Put the bait in the pitcher of water and submerge it. Weigh the water that spilled out of the pitcher into the pot.

Nothing but metal will survive bluefish.

How to turn off ActiveX Under the Windows Start menu, select the Settings | Control Panel Double-click on the Internet icon i. Select the Security tab Make sure that the Internet zone is selected. Select the Custom level option for the Internet zone. Push the Settings button for the Custom level. that should get you to where you need to make changes.

I have braid on 2 rods, 1 with 50lb suffix for weeds and other thick stuff and the other one is for saltwater bottom fishing. I just changed from power pro to suffix. Power pro kept breaking on me, when I cast, or when I set the hook. Suffix is much better in my opinion, no break offs, easier to cast, and makes less noise.

No, like Nova said over time it will harden plastics baits.

that looks like it hurts.

http://senkosam.tripod.com/index.html

I use devcon over my powder painted jig heads. I powder paint, cure them then do my thing with an acrylic based paint, put the 3d eyes on then put thinned devcon on and stick them in my drying wheel until they are dry. Thinned devcon works better on lead. IMO

I have a RCBS pot and it drips. I just put something under it to catch drippings.

best price around for a good Ca glue, under $3 link to the glue I am a nitro RC guy that uses it to glue my tires.

I normally get 50 -150 bad hooks out of 1000. I haven't purchased sickles hooks in a while. Might give them a 2d chance.

xacto or I use the paper that stickers come on. Slick on 1 side, slide the eye to 1 corner then apply the same way as you would with an xacto. Pocket knife would work also.

Senkosam