Basseducer
-
Posts
1,277 -
Joined
-
Last visited
-
Days Won
10
Content Type
Profiles
Articles
TU Classifieds
Glossary
Website Links
Forums
Gallery
Store
Everything posted by Basseducer
-
Harbor Freight has a flat black and some of the other pp companies haf mat colors. I dont think you'll find any of the Component Systems colors in mat. You might have to add a flat clear to your items.
-
JBarlow beat me to it.
-
I just use a heavy duty paint mixer on an electric drill. Then I break the drum down into 5 gallon buckets. Easier to work with that way and I don't have to remix the whole drum every time I use plastic.
-
Wouldn't you get some forced settling of salt and flake if used?
-
I have had red hooks darken quite a bit while cooking the paint, but not tinned hooks. I would think if the hook is discoloring the paint might be scorching. What temp do you cure at? Is your oven dial accurate?
-
What color hooks did you start with?
-
Search the classified, seem to remember someone getting rid of a bunch of stuff for spinnerbaits.
-
I'm sure Ultra Molds sells replacement part for their machine. Call them and see if they will sell you one.
-
Powder Painting Jig Heads w Swivels solution?
Basseducer replied to Mad Moose Baits's topic in Wire Baits
Here is a link https://www.stockcap.com/store/epdm-caps.html -
Powder Painting Jig Heads w Swivels solution?
Basseducer replied to Mad Moose Baits's topic in Wire Baits
Look in any of the powder paint sites. They have Hi=temp silicone caps used to cover the ends of screws. You can get them in all sizes. -
Who makes the 7.5" finesse, I suppose it is a worm? Is it full round?
-
I haven't had any problems with salt.
-
I got the electric meat grinder from Harbor Freight. Works great. I tried a hand grinder first and had the same problems as Cub48.
-
cadman, I try everything I can to paint them, but when a customer insists on raw lead I put a drop of super glue where the hook and keeper come out. Like paint I can't guarantee how long before it comes loose again, but at least it was tight when it left my shop.
-
Go with what the mold calls for.
-
Cadman, I have been using the Eagle Claw 570BP series and they work fine.
-
Don't for get Mustang Wire, friendly folks, great service.
-
I have a winged worm I'll get rid of.
-
Yes, I thought about going electrostatic, but I do too many with multi colors.
-
No, just the hobby sand blaster.
-
Bob, I know that you probably don't want to go through the extra gearing up, but I don't have any of those problems when I spray my powder.
-
I have yet to experience that, just a nice even coat. The flake is distributed nicely as well.
-
Here you go. It was the first one I found. http://www.barlowstackle.com/Powder-Paint-Spray-Gun-P1006.aspx
-
I spray powder paint on spinner blades and spoons all the time. You get a thin even coat and you can spray only one side if you like.
-
I use their Green Pumpkin the way it is and I use Military Green for Watermelon.
