A.C.T. LURES

That looks like Nature's Edge skirt material from Net rafters. Pumpkin (090) Red (008) Could be a little orange (018) in there to

He can reach me at actlures@yahoo.com Paul

That is where I bought mine from also (1/8") The shipping was more then the rod Paul

What about Watermelon Frog hair round rubber, would that help? Paul

The hook in the picture looks to be a Bronze finish, the Mustad 32724 is a black nickel finish Paul

Thats what I did also, works great Also mark in the mold so they come out the same Paul

You can buy the Teflon by the foot from Mcmaster Carr, I bought 8 foot, the shipping was more then the material. But 8 foot is a lifetime of this. I also have some I use only for pouring, and others only for painting It is by far better then the factory pins Paul

The teflon is the way to go, I pour my heads with them also, weedguards fit everytime Barlows has them in their website now http://www.barlowstackle.com/Teflon-Base-Hole-Pins-P2186C220.aspx You wont go back to the pins after using them Paul

If you are still looking for some I have them in 3/0, 4/0, 5/0, & 6/0 Let me know if I can help Paul

Barlows carries them in smaller amounts up to size 3 http://www.barlowstackle.com/Split-Ring-Fine-P827.aspx I use the 2.5 on my spinnerbaits work perfect Paul

I have noticed the same thing on all dark colored baits! Seems like if you cure your paint first than UV coat it it doesnt take on the purple hue. It looks AWESOME on a pearl spinnerbait/buzzbait head Paul

I have used it and love it!!!!! I havent used the Devcon 2 ton though so I cant compare the two items There is no smell with the Seal Coat and water clean up. Paul

Here is another smaller rack http://www.tjstackle.com/ Click on jig clamps Paul

I have been playing with the teflon pins and they work great, still a good idea to get a 1/8" drill bit incase you have a tight fit. You can ream them out by hand, and the weedguards fit great! I glue mine in with super glue gel, works great and one drop is all it takes Paul