Jump to content

tukta

TU Member
  • Posts

    52
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by tukta

  1. Just saw on TV that women who have their nails done and cured with uv light are ending up with melanoma to the hands and fingers. There are a lot of variables but it should be brought up and discussed because there are a lot of guys using uv to cure lures. My first suggestion would be to use gloves and uv protection for your eyes. And as little exposure as possible
  2. tukta

    Color choices

    Pinterest (dang spell checker)
  3. tukta

    Color choices

    I've been struggling with color combo's call it block so started to find topics on contrasting colors that didn't do it. Out of the blue I went to printers and looked up peacock wall art and that was it all the color combo's that worked together. I wanted to share
  4. tukta

    Metallic paint

    I've had good results by putting pledge floor wax on ,now use a different product quick shine the put a clearcoat on top pledge is gone
  5. Just a quick question, I want to paint some metallic lures and was wondering what paint to use 5o get a metallic chrome look
  6. Base coat I use zinzeer primer, I've used it for yrs but it seem that it didn't age well.the rest was createx paint
  7. Thanks for all the suggestions really helped me narrow the problem again Thanks
  8. OK I figured the problem out got rid of primer bought a new can of white. Since not having problem 2 of colors didn't change them but changed the color I was having problem with everything went fine so must have been a problem with the paint. Just finished a 100 jig run with no problem
  9. Dink createx paint is an acrylic paint mostly used for airbrush you might be on to something will warm jigs up also have 10 that I dipped into glade floor polish. I paint fish lures with no problems this is crazy I spray a light coat to give it (tooth). I do 4 coats it's like paint is beading and running. I know I could powder paint but easier to layer 4 colors
  10. Yup I did white powder paint vinyl, killz which stops stains on walls and ceiling as you can tell getting a little desperate
  11. I airbrush all my jigs problems I'm having is paint goes on blotchy. Can it be paint is reacting to the lead little frustrated want to see others experience, I've been painting for 10 years so not a novice but missing something may have to clearcoat before painting any help will be appreciated
  12. I've been using clear cement sealer for years. It's glossy hard as kbs ,the only problem is you have to buy a gallon but I've been using the same stuff for 5 yrs cheaper in the long run pour in quart jar use it out of jar. This isn't standard what people are lead to use but works
  13. tukta

    Chrome paint

    Thanks for the help I think the floor finish is the answer you guys are wealth of info and great help for research thanks again
  14. tukta

    Chrome paint

    I am doing some lure repaint and need a chrome base,problem I'm having is after spraying chrome then go to clearcoat the chrome goes flat ruining the effect. What methods are you using to keep mirror finish on your lures
  15. beautiful job will stick with water base.
  16. Hi I was wondering what's it like to use enamel paint and the clean up after. Is it worth it I think that there is more metallic just looking opinions
  17. tukta

    making Masks

    Thought I would put this out there I needed a rough outline on a crankbait I was painting what i ennded up doing was cutting the mask a little bigger then burned the mask which gave me an irregular edge after knocking loose burn material on mask. It was a real cool effect.
  18. I USE cs vinyl paint then use a small drill the back end dab it in the paint then the jig use the cap get a little buildup on the back side . I USE white for the big dot then the color i want for the inside works perfect
  19. Hi I couldn't bring up your tutorial on fiber optic eyes how I can see your tutorial 

  20. I've been using cement sealers for the past yr for clear coat and now no one is posting about using them .I've had no problem in the past yr with them,any problems that people have run into???
  21. sorry took so long on my third surgery Just put i Arkie baits they have two sizes
  22. Arkie baits work incredible the other is Coots Wasp coots really have to be tuned but they work
  23. tukta

    Print Program

    I ha've'nt posted been sick but up and running now. I want to print some pics of different species to put on a lure and was wondering if there is a program that your using to reduce the prints down to glue on the lure I'm a little slow on figuring this out so your help will be appreciated
  24. tukta

    Glow Paint

    Thanks I will have to rethink this project
×
×
  • Create New...
Top