Jump to content

Shaggy1

TU Member
  • Posts

    13
  • Joined

  • Last visited

  • Days Won

    1

Shaggy1 last won the day on July 20 2016

Shaggy1 had the most liked content!

Shaggy1's Achievements

Newbie

Newbie (1/14)

2

Reputation

  1. Shaggy1

    Hooks Usa?

    Has anyone done business with Hooks USA? I placed an order 14 days ago. Tried calling 4 times over the past three days and now the website is all messed up? Any info would be great. Thank you guys. Oh yeah and almost 19 dollars to ship 1000 hooks that could fit in a USPS box and ship for 7 dollars. My fault not noticing the shipping until after I paid. But still.
  2. Again. Thank you so much. I've been a lurker on this board forever and usually figure stuff out on my own. But I really struggled with this issue. I still have a few minor things to work out but I think DN is going to perform well and also save me a lot of time and money in the long run. If you are using S81 or any other DN products I highly suggest calling Dick himself. The best customer service I have ever worked with.
  3. I bought small jars to start. I will buy in larger quantities and have research tapping the can. I'm sure I'll mess it up but I'm gonna try.
  4. Much thanks to everyone. You guys are awesome. So taking a bit of advice from all of you guys and DN after a great phone conversation I decided to spray S81 without thinning it at all. We used a .5 tip with a psi of 10. Sprayed very close about 2 inches from the blades and put on a heavy coat. Sprayed roughly 250 blades and they are smooth and glass like. All blades had been dried for a week. If this finish is super tough like everyone says then this is how we will do blades from now on. In sure I'll have to thin an opened can that stars to thicken a bit in the future but for now in.happy with the results. In a week I will do durability testing.
  5. Thank you so much guys. Talked to Dick Nite yesterday. Going to use your advice and his and will find out this morning how it works. Will keep you updated on the issue.
  6. Using gravity fed. Thank you for brainstorming though.
  7. I am using a .5 and then tried.35 nozzle. Same results. My can of DN is also brand new. I'm stumped
  8. Ben. I've also tried spraying very close.
  9. How do you keep the wood from slipping on the mandrel? I'm having issue with slipping. I've tried wax on the mandrel and small pieces of it through the center of the balsa but I'm still getting stripping/slipping.
×
×
  • Create New...
Top