C-Bass

I use gorilla super glue and a 70% isopropyl alcohol solution as an accelerant. I use a toothpick to dab a tiny bit of glue on the eye opening of the swimbait and then I use a Q-tip to dampen the back of the plastic eye with the alcohol and it sets almost instantly. You can clear dip it afterwards but I have never had an eye come off. You would have to tear the actual bait to get the eye off.

I live near Toronto Canada and we are limited to MF plastisol from a local supplier in my area because the shipping rates from the US as plastisol is considered hazardous are ground shipping only which take forever and cost a fortune. The MF plastic has not given me a problem whatsoever. The only gripe is that is stays pretty thick until it hits about 330 degrees. I've seen videos where Dead-on plastic is still nice and runny at around 300 degrees which would make it easier to work with for hand pouring. You might want to check them out. Personally I do mostly injection so the MF works fine.