KandyBass Posted April 8, 2009 Report Share Posted April 8, 2009 Does anyone know where I can find an Evinrude intruder 150 powerhead at a reasonable price? Thanks Quote Link to comment Share on other sites More sharing options...
Delw Posted April 8, 2009 Report Share Posted April 8, 2009 Does anyone know where I can find an Evinrude intruder 150 powerhead at a reasonable price? Thanks What do you consider a reasonable price? I have installed 30-50 of them over the years for guys that were remans and there all about the same price. but you wont find good stuff cheap nor will you find cheap stuff that lasts. depending on the year your looking at anywhere from 2700 for a crossflow 1977-1991 reman only v6 carbed 1991-1993 and the 1994-2003 4500reman 5400 new that includes core charges and dont plan on getting anything back on a core as its not worth the shippng cost to save 1-2 hundred at the most. I don't sell them now as I am too busy with machining. if your run into a pickle let me know. its approx 6-15 hours to do a swap. carbs must be rebuilt, VRO pump MUST be replaced with a new one and a new water impeller MUST be NEW. if you dont do the above things I just mentioned you just wasted all your time and money on a new power head. Most power heads have a 1 year warrenty I have never had a omc reman or aftermarket power head go out nor even a merc. if you goto OMC for you add 2-3 k just for the power head to the above price Quote Link to comment Share on other sites More sharing options...
Delw Posted April 8, 2009 Report Share Posted April 8, 2009 I forgot to mention the whole cat I was looking at was a 2004 edition, I thought it was my new on but thats in the shop on my gambler. I think the prices have come down about 15% Quote Link to comment Share on other sites More sharing options...
