flabasspond Posted June 30, 2011 Report Share Posted June 30, 2011 Hello Everybody....does anyone have a source for STEEL buzzbait blades (Delta Type 3/8 oz size)...I've checked my usual places- and no luck...Thanks!! Quote Link to comment Share on other sites More sharing options...
CNC Molds N Stuff Posted June 30, 2011 Report Share Posted June 30, 2011 Hello Everybody....does anyone have a source for STEEL buzzbait blades (Delta Type 3/8 oz size)...I've checked my usual places- and no luck...Thanks!! Have you seen some before? Steel will rust. Stainless steel is hard to work with. Aluminum may be soft, but it doesn't rust, and it is pretty easy to work with compared to stainless. Quote Link to comment Share on other sites More sharing options...
flabasspond Posted June 30, 2011 Author Report Share Posted June 30, 2011 Hello again....Yes- they were the original Buzzbait blades- before they were made from aluminum- and were plated-usually nickel-although I have seen copper plated ones. The blades I used to have were made of VERY thin stock and were probably not much heavier than the aluminum blades still available. I dont believe I've ever seen one with a stainless blade. Quote Link to comment Share on other sites More sharing options...