vandsamu Posted January 24, 2012 Report Share Posted January 24, 2012 So I need a little help from all the soft plastic legends out there. I want to start making my own soft platics but I dont really know where to start. I found two websites that offer kits. http://www.caneycreekmolds.com/Kit--Injection-Wacky_p_252.html http://www.bearsbaits.com/Stik-Bait-Kit-Worm-Mold-Kit_p_170.html Any help you guys can offer me would be great. Thanks Quote Link to comment Share on other sites More sharing options...
MonteSS Posted January 24, 2012 Report Share Posted January 24, 2012 Either one of those starter sets would be a great choice and include tools you can use forever. I reccomend not starting with a Senko type mold as a first. They require alot of salt (to make them sink) and that complicates thing for a newbie. GL.....Bill Quote Link to comment Share on other sites More sharing options...
Rod Baits Posted January 24, 2012 Report Share Posted January 24, 2012 Jann's Netcraft has a starter kit that is reasonably priced. It comes with plastisol,5molds,One of their injectors ,some color and glitter. I have one on the way .It was in my opinion a good starter kit. Quote Link to comment Share on other sites More sharing options...
Basseducer Posted January 24, 2012 Report Share Posted January 24, 2012 Rod, There has been alot of chatter on here about how dangerous the Jann's injectors are. Many have been burned with that thing. Do some searches here before you use it, it might save you some injury. Quote Link to comment Share on other sites More sharing options...
Rod Baits Posted January 25, 2012 Report Share Posted January 25, 2012 Thank you I appreciate the advice . Quote Link to comment Share on other sites More sharing options...
