Jump to content
spoonpluggergino

Another Litle Cadget

Recommended Posts

Here is another litle tool that I made to help me scribe angle line on a plug, seems like I needed a third hand

 

Material you need

 

A: One six inch flexible metal ruler. I use Empire from H.D.

 

B: one #4 X 1/2 wood screw

 

C: A small block of hard wood. Dimension I used 1/2 x 1 x 2-3/4 long

 

To Build

 

Very inportant. Holes on the Block and ruler must be on center otherwise the angles will be off , also make sure the screw is not to sloppy in the ruler

 

A: Drill a small hole at the end of the ruler, Must be on center

 

B: Drill another hole for the screw in the wood block that must be on center

 

C: assemble the block to the ruler with the screw

 

Gino

005.JPG

004.JPG

007.JPG

005.JPG

004.JPG

007.JPG

005.JPG

004.JPG

007.JPG

005.JPG

004.JPG

007.JPG

005.JPG

004.JPG

007.JPG

005.JPG

004.JPG

007.JPG

005.JPG

004.JPG

007.JPG

005.JPG

004.JPG

007.JPG

post-22349-0-20431000-1360427533_thumb.jpg

post-22349-0-39692600-1360427561_thumb.jpg

post-22349-0-24799100-1360427598_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top