archery1 Posted April 8, 2014 Report Share Posted April 8, 2014 (edited) does any body use them.. have them or don't usse them ? are they good or bad? Edited April 8, 2014 by archery1 Quote Link to comment Share on other sites More sharing options...
gone2long Posted April 8, 2014 Report Share Posted April 8, 2014 I haven't heard anything bad about them their all good. Quote Link to comment Share on other sites More sharing options...
fishon-son Posted April 8, 2014 Report Share Posted April 8, 2014 if you look around on the forums almost everything ive read about dels is to say away from them..very slow shipping...ive never used them myself . but just going by what I have read..i have a basstackle injector..works great and got it fast with my molds... Quote Link to comment Share on other sites More sharing options...
fishon-son Posted April 8, 2014 Report Share Posted April 8, 2014 one more thing...im not busting dels balls at all...im sure his stuff is all good....best thing to do is send a email or call to see if there in stock and ready to ship when you place ur order. if you don't get a answer back then you know....bears baits has great stuff too...give them a try also.. Quote Link to comment Share on other sites More sharing options...
Apdriver Posted April 8, 2014 Report Share Posted April 8, 2014 I don't know about dels injector but I've been using one called the Pro-Lam that is really nice. It can be used as singles or for shooting laminates. Also has other accessories available. Quote Link to comment Share on other sites More sharing options...
ipt Posted April 9, 2014 Report Share Posted April 9, 2014 yeah ive used one. not sure if he still makes them with the screw on tip. it was a good injector, thick walls though so takes a while to heat up and takes a while to cool down. in my opinion the 1/8th turn safety pin is just fine, and i like a thin walled one. baitjunky's and BT are both solid injectors Quote Link to comment Share on other sites More sharing options...
toadfrog Posted April 9, 2014 Report Share Posted April 9, 2014 Solid for me . Different strokes for different folks . Quote Link to comment Share on other sites More sharing options...
archery1 Posted April 9, 2014 Author Report Share Posted April 9, 2014 like toadfrog said diff stroke 4 diff folks.. i was told bt injectors are thick walled also???? i like the idea of lock pin.. my nozzles like to pop off also.. Quote Link to comment Share on other sites More sharing options...
basscatcher89 Posted April 10, 2014 Report Share Posted April 10, 2014 I have an injector from del and it works great. I just got it back in january. It has the screw on tip. Took a little bit to get to me but I wasnt in a hurry anyway. Quote Link to comment Share on other sites More sharing options...
robalo01 Posted April 10, 2014 Report Share Posted April 10, 2014 I have one of Dels with t screw on tip and thicker walls and I have a couple from Bear with the pop off tip and thin walls. I almost always only use Bear's. Dels is just too cumbersome to deal with and takes too long to warm up. About all it has going for it is that it is very tough. Quote Link to comment Share on other sites More sharing options...
Mudd Butt Baits Posted April 11, 2014 Report Share Posted April 11, 2014 I have the 6oz with a screw on nose. I like it, it seems to work just fine. I put it under a heating pad to keep it warm. I also had a friend draw marks on the shaft so I knew how much to suck up each time. Quote Link to comment Share on other sites More sharing options...
